Sony MHC-V90DW Operating Instructions Manual page 40

[OFF]: Playback starts at the resume
playback point only for the current
disc in the system.
[RESET]
Returns the setup menu settings to
the default settings. For details, see
"Returning the setup menu settings
to the default" (page 80).
Setting the HDMI options
– [HDMI SETUP]
[HDMI RESOLUTION]
Selects the TV output resolution
when the TV is connected via HDMI
cable.
[AUTO(1920×1080p)]: Outputs
video signals according to the
resolution of the TV.
[1920×1080i]/[1280×720p]/
[720×480p]*
Outputs video signals according to
the selected resolution setting.
1
* For Latin American models only.
* 2 For other models.
[YC C /RGB(HDMI)]
B R
[YC C ]: Outputs YC
B R
signals.
[RGB]: Outputs RGB video signals.
[AUDIO(HDMI)]
[AUTO]: Outputs audio signals in
original format from HDMI OUT (TV)
jack.
[PCM]: Outputs 2-channel Linear
PCM signals from HDMI OUT (TV)
jack.
40
GB
1
/[720×480/576p]*
C video
B R
[CONTROL FOR HDMI]
[ON]: The Control for HDMI function
is enabled. You can operate
mutually between system and TV
connected with an HDMI cable.
[OFF]: Off.
[AUDIO RETURN CHANNEL]
Set this function when the system
is connected to a TV's HDMI IN jack
that is compatible with Audio Return
Channel. This function is available
when you set [CONTROL FOR HDMI]
to [ON].
[ON]: You can listen to TV sound
from the speakers of the system.
[OFF]: Off.
[STANDBY LINKED TO TV]
This function is available when you
set [CONTROL FOR HDMI] to [ON].
[AUTO]: When you turn off the TV,
the system turns off automatically in
the following conditions:
2
:
•
— a VIDEO CD or DVD VIDEO is
loaded in DVD/CD function
•
— a DATA CD or DATA DVD is loaded
and [VIDEO] mode is selected
•
— USB function and [VIDEO] mode
are selected
•
— TV function is selected
[ON]: The system turns off
automatically when you turn off the
TV regardless of the function.
[OFF]: The system does not turn off
when you turn off the TV.