Operating The Appliance; Preparing The Washing Machine; Switching On The Appliance/ Selecting A Programme; Change The Programme Default Settings - Bosch WAY28791IR Instruction Manual And Installation Instructions

Table of Contents

Advertisement

1
Operating the
appliance
P reparing the washing
O p e r a t i n g t h e a p p l i a n c e
machine
The washing machine must be
Note:
correctly installed and connected.
From ~ Page 14
Plug into the mains.
1.
Turn on the tap.
2.
Open the washing machine door.
3.
Check that the drum is completely
4.
drained. Drain if necessary.
Otherwise, the load display may
malfunction. ~ Page 48
Switching on the appliance/
selecting a programme
Press the # button. The appliance is
switched on.
The Bosch logo appears on the display
and all indicator lamps light up.
The Cottons programme set at the
factory is then always displayed.
You can:
use this programme or
select another programme on the
control panel or
select a programme under
Additional programs. ~ Page 27
If you have activated the
Note:
childproof lock, you must deactivate it
before you can set a programme.
~ Page 44

Operating the appliance

The indicator lamp on the programme
selector lights up and the main menu
with the programme default settings
for the selected programme appear on
the display panel: ~ Page 27
Temperature,
Spin speed,
Programme duration,
Any additional settings and
Information on water and energy
consumption. ~ Page 13
In appliances with a drum light:
The drum is lit after switching on the
appliance, after opening and closing the
door and after starting the programme.
The light switches off automatically.
You can:
use the programme default settings
and load laundry ~ Page 42,
or change the programme default
settings and/or select additional
settings.
Change the programme
default settings
You can use or change the default
settings for each washing cycle.
To do this, repeatedly press the
corresponding button until the required
setting is displayed. ~ Page 27
Pressing and holding the buttons
Note:
automatically runs through the set
values.
The settings are activated without
needing to be confirmed.
The settings are not saved after the
washing machine is switched off.
Programme default settings
~ Page 37
en
41

Advertisement

Table of Contents
loading

Table of Contents