Table of Contents
Advertisement
Ï Rinse Plus
(Ï Rinse Plus)
Additional rinse cycle depending on the
programme; longer programme length
for particularly sensitive skin and/or for
areas with very soft water.
% Soak
(% Soak)
Before the main wash cycle starts, the
washing remains for longer in the water
to partially dissolve intensive soiling.
Notes
Put detergent in dispenser I before
■
starting the appliance.
Load laundry of the same colour.
■
If your appliance does not have this
■
additional programme setting, you
can soak as follows:
Put detergent in dispenser II before
1.
starting the appliance.
Select the i Cottons 40 °C
2.
programme and the A Start/
Reload button.
Select the A Start/Reload button
3.
after approx. 10 minutes. The
laundry remains in the soaking
solution.
Leave the laundry to soak for as long
4.
as required, then either select the
A Start/Reload button again to
continue the programme or change
the programme.
Operating the appliance
1
Operating the
appliance
Install and connect washing
N ote:
O p e r a t i n g t h e a p p l i a n c e
machine properly.
Before the 1st wash ~ Page 19
Preparing the washing
machine
Notes
Never switch on a damaged
■
washing machine!
Inform customer service!
■
Connect the mains plug.
1.
Turn on the tap.
2.
Open the door.
3.
Check that the drum is completely
4.
emptied. Empty if necessary.
Select programme/switch on
the appliance
If you have activated the
Note:
childproof lock, you must first deactivate
it before you can set a program.
Use the program selector to select the
required program. Can be rotated in
either direction.
The appliance is switched on.
The program default settings for the
selected program appear in the display
panel:
Temperature*,
■
Spin speed*,
■
The maximum load and the duration
■
of the program (alternately),
Energy consumption*.
■
*depending on the model
en
27
Advertisement
Table of Contents
