Table of Contents
Advertisement
Quick Links
Definitions: Safety Alert Symbols and Words
This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk
of personal injury or property damage.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
(Used without word) Indicates a safety related message.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage.
Fig. A
12
7
4
3
9
Variable speed
1
3rocker switch
Lock-off button
2
Spindle
3
Collet nut
4
Small spanner (13 mm)
5
Large spanner (17 mm)
6
7
Collet [1/4" (6.35 mm)]
Battery
8
11
5
8
Battery release button
9
Grinder body
10
Grinder neck
11
LED Worklight
12
Speed selector switch
13
2
13
1
6
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
WARNING: To reduce the risk of injury, read the
instruction manual.
if you have any questions or comments about this or
any D
WALT tool, call us toll free at:
e
1-800-4-D
WALT (1-800-433-9258).
e
English
10
9
8
1
Advertisement
Table of Contents
Related Manuals for DeWalt DCG426M2
Summary of Contents for DeWalt DCG426M2
- Page 1 English Definitions: Safety Alert Symbols and Words This instruction manual uses the following safety alert symbols and words to alert you to hazardous situations and your risk of personal injury or property damage. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
-
Page 2: General Power Tool Safety Warnings
English GENERAL POWER TOOL SAFETY WARNINGS b ) Use personal protective equipment. Always wear eye protection. Protective equipment such as dust WARNING! Read all safety warnings and all mask, non-skid safety shoes, hard hat, or hearing instructions. Failure to follow the warnings and protection used for appropriate conditions will reduce instructions may result in electric shock, fire and/or personal injuries. - Page 3 English into account the working conditions and the the power tool. Accessories running faster than their work to be performed. Use of the power tool for rated speed can break and fly apart. operations different from those intended could result e ) The outside diameter and the thickness of your in a hazardous situation.
-
Page 4: Kickback And Related Warnings
English m ) Use clamps to support workpiece whenever a tendency to snag the rotating accessory and cause practical. Never hold a small workpiece in one loss of control or kickback. hand and the tool in the other hand while in use. c ) Do not attach a toothed saw blade. -
Page 5: Additional Safety Information
English g ) Support panels or any oversized workpiece • Do not use Type 11 (flaring cup) wheels on this tool. to minimize the risk of wheel pinching and Using inappropriate accessories can result in injury. kickback. Large workpieces tend to sag under •... - Page 6 English • Charge the battery packs only in designated Use Mode: When the FLEXVOLT™ battery stands alone or is WALT chargers. in a D WALT 20V Max* product, it will operate as a 20V Max* battery. When the FLEXVOLT™ battery is in a 60V Max* or a •...
- Page 7 1-800-4-D WALT (1-800-433-9258) or (AWG or American Wire Gauge) for safety. The smaller visit our website www.dewalt.com. the gauge number of the wire, the greater the capacity of the cable, that is, 16 gauge has more capacity than 18 The RBRC®...
- Page 8 English WARNING: Burn hazard. Do not submerge the maximum (or lesser) gain approved for the transmitter by battery pack in any liquid or allow any liquid to Industry Canada. To reduce potential radio interference enter the battery pack. Never attempt to open the to other users, the antenna type and its gain should battery pack for any reason.
-
Page 9: Charger Operation
English Charger Operation separately) at least 1" (25.4 mm) long, with a screw head diameter of 0.28–0.35" (7–9 mm), screwed into wood to an Refer to the indicators below for the charge status of the optimal depth leaving approximately 7/32" (5.5 mm) of the battery pack. -
Page 10: Intended Use
English Three-Speed Gearing (Fig. A) 2. For long storage, it is recommended to store a fully charged battery pack in a cool dry place out of the WARNING: Regardless of the speed setting, the rated charger for optimal results. speed of the accessory must be at least equal to the nOTE: Battery packs should not be stored completely maximum speed marked on the power tool. -
Page 11: Personal Safety
English exposed mandrel length is no more than 1.0" (25 mm) Fig. D after inserting accessory into collet. WARNING: Projectile hazard. Only use accessories with shanks that match the installed collet. Smaller shanks will not be secure and could become loose during operation. CAUTION: Never tighten the collet without first installing an accessory in it. -
Page 12: Cleaning And Disposal
2 YEARs FREE sERViCE On DEWAlT BATTERY PACKs Recommended accessories for use with your tool DC9071, DC9091, DC9096, DC9182, DC9280, DC9360, DCB120, are available at extra cost from your local dealer or DCB127, DCB201, DCB203, DCB203BT, DCB207, DCB361 authorized service center. - Page 13 English can return it within 90 days from the date of purchase with a receipt for a full refund – no questions asked. lATin AMERiCA: This warranty does not apply to products sold in Latin America. For products sold in Latin America, see country specific warranty information contained in the packaging, call the local company or see website for warranty information.