Troubleshooting
Clothes have shrunk, hardened or spoiled.
•
A program not suitable with the laundry type might have been used. >>> Check the
maintenance labels on the clothes and select a program suitable for the clothes.
The lighting inside the drying machine does not turn on. (For models with a lamp)
•
Drying machine might not be turned on with the On/Off button or program might not
be selected for machines without an On/Off button. >>> Make sure that the drying
machine is turned on.
•
Lamp might be malfunctioning. >>> Contact Authorized Service to replace the lamp.
Filter cleaning warning symbol/LED is on/flashing.
•
Fibre filter might not be cleaned. >>> Clean the filter.
•
The filter slot might be clogged with lints. >>> Clean the filter slot.
•
A layer of fluff might have accumulated clogging up the lint filter pores. >>> Wash the
filter with warm water.
•
The condenser might be blocked. >>> Wash the condenser.
Water drips from the loading door.
•
Fibres might have gathered on the inner sides of the loading door and the loading door
gasket. >>> Clean the inner surfaces of the loading door and the loading door gasket
surfaces.
Loading door opens by itself.
•
Loading door might not be closed completely. >>> Push the loading door until the
closing sound is heard.
Water tank warning symbol / led is on/flashing.
•
Water tank may be full. >>> Empty the water tank.
•
Water discharge hose might have collapsed. >>> If the product is connected directly to
the water drain check the water discharge hose.
Steam symbol is flashing.(For the products with a steam function)
•
Steam tank may be empty => Fill the steam tank with distilled or condensed water.
Steam programs do not start (For the products with a steam function)
•
Steam tank may be empty, steam tank warning icon may light up on the screen => Fill
the steam tank until the steam icon goes off.
Wrinkles are not removed with wrinkle removing program. (For the products with a steam
function)
•
Excess amount of laundry may have been placed => Place specified amount of laundry.
•
Steam application time may be selected in low level => Choose a program with high
amount of steam.
•
After completion of the program, the laundry may have stayed in the machine for a long
time => Take the laundry out as soon as the program finishes, and hang it out.
Laundry odour not lessened with the odour removal program.(For the products with an
odour removal program)
•
Excess amount of laundry may have been placed => Place specified amount of laundry.
•
Steam application time may be selected in low level => Choose a program with high
amount of steam.
A
If the problem persists after following the instructions in this section, contact your
vendor or an Authorized Service. Never try to repair your product yourself.
58 / EN
Dryer / User Manual