Establish Secure Connection With Ap By Wps - Rosewill RNX-AC600HGUBEv2 User Manual

High Gain USB Wireless Adapter

3.4 Establish Secure Connection with AP by WPS

Wi-Fi Protected Setup (WPS) is the latest wireless network technology which
makes wireless network setup become very simple. If you have WPS-enabled
wireless access point, and you want to establish a secure connection to it, you
don't have to configure the wireless access point and setup data encryption
by yourself. All you have to do is to go to the WPS setup page of this wireless
adapter, click a button, and then press a specific button or enter a set of 8-digit
code on the wireless access point you wish to establish a secure connection - just
three simple steps!
For older wireless access points, it's possible to perform a firmware upgrade
to become a WPS-enabled access point. Since they may not have a hardware
button to press for WPS setup, you can use an alternative WPS setup method by
inputting the pin code. Every WPS-compatible wireless network adapter supports
pin code configuration method; you can just input the code to wireless access
point, and the wireless access point and wireless network adapter will do the rest.
This wireless network adapter is compatible with WPS. To use this function, the
wireless access point you wish to connect to must support WPS functions.
Please follow the instructions below to establish secure connection between
WPS-enabled wireless access point and your wireless network adapter:
This wireless network adapter supports PIN code and Push-Button WPS.
1. Right-click Client configuration utility icon, and click 'Open Config Utility'.
RNX-AC600HGUBEv2
24
User Manual