Establish Secure Connection With Ap By Wps - Rosewill RNX-AC600NUB User Manual

Nano USB Wireless Adapter

3.4 Establish secure connection with AP by WPS

Wi-Fi Protected Setup (WPS) is the latest wireless network technology which
makes wireless network setup become very simple. If you have WPS-enabled
wireless access point, and you want to establish a secure connection to it, you
don't have to configure the wireless access point and setup data encryption by
yourself. All you have to do is to go to the WPS setup page of this wireless card,
click a button, and then press a specific button or enter a set of 8-digit code on
the wireless access point you wish to establish a secure connection - just three
simple steps!
For older wireless access points, it's possible to perform a firmware upgrade
to become a WPS-enabled access point. Since they may not have a hardware
button to press for WPS setup, you can use an alternative WPS setup method
- input the pin code. Every WPS-compatible wireless network card support pin
code configuration method; you can just input the code to wireless access point,
and the wireless access point and wireless network card will do the rest for you.
This wireless network card is compatible with WPS. To use this function, the
wireless access point you wish to connect to must support WPS function too.
Now, please follow the following instructions to establish secure connection
between WPS-enabled wireless access point and your wireless network card.
This wireless network card supports 2 kinds of WPS: PIN code and Push-
Button.
Please follow the following instructions to setup WPS:
1. Right-click Client configuration utility icon, and click 'Open Config Utility'.
User Manual
RNX-AC600NUB
24
Nano USB Wireless Adapter
2.
Click 'Wi-Fi Protect Setup' menu.
3.
You can use PIN code or Push-Button configuration, and WPS-compatible
wireless access point must use the same type of WPS. For instructions on setup
each type of WPS, see next 2 chapters for detailed instructions.
User Manual
RNX-AC600NUB
25