Steam Cooking Function - Oster CKSTRC9030S Instruction Manual

PASTA FUNCTION
1. Place water inside inner pot. Avoid using more than 8 cups of water to
prevent spillage.
2. Set inner pot into unit. Make sure inner pot sits directly in contact with heating
plate by turning it slightly from right to left until seated properly. Cover with lid
to boil faster.
3. Plug unit into appropriate electrical outlet.
4. Start/Stop Button Light
5. Press Pasta Button and then press Start/Stop Button to start boiling water.
Both Pasta and Start/Stop Button Lights will be solid, indicating selected
function has started.
6. Once unit signal sounds, lift and remove lid carefully to avoid scalding and
allow water to drip into inner pot. Add pasta to boiling water. Unit will cook
pasta for 10 minutes. Do not cover with lid. To stir pasta, use paddle or
another long, handheld utensil.
7. Once it finishes, unit signal will sound, indicating that pasta is ready. It will
automatically turn off, going back into the standby mode with the Start/Stop
Button light blinking. For softer pasta, keep pasta in hot water for a little
longer. Filled pasta, like ravioli, may also need to be cooked for a longer
period. Fresh pasta may need to be cooked for a shorter period.
NOTE: You can use the Steam Tray as a strainer to drain the water.
NOTE: You can interrupt at any time by pressing Start/ Stop Button . Unit will go
back into standby mode with the Start/Stop Button light blinking. Allow appliance to
cool completely before cleaning. Disconnect plug from wall outlet when not in use.

STEAM COOKING FUNCTION

1. Place desired amount of water inside inner pot between minimum and
maximum levels.
2. Place foods to be steamed on steam tray.
3. Set inner pot into unit. Make sure inner pot sits directly in contact with heating
plate by turning it slightly from right to left until seated properly. Cover with lid.
WHEN USING AUTOMATIC STEAM COOKING MODE, DO NOT OPERATE
UNIT UNCOVERED. STEAM IS GENERATED DURING USE.
4. Plug unit into appropriate electrical outlet.
5. Start/Stop Button Light
6. Press Steam Cooking Button
steam cooking process. Both Steam Cooking and Start/Stop Button Lights
will be solid indicating selected function has started. Place the steam tray
on the inner pot when you hear the first signal. This signal indicates that the
steam has started. NOTE: If you wish to turn foods inside steam tray, lift and
remove lid carefully to avoid scalding and allow water to drip into steam tray.
Use paddle or another long, handheld utensil to scoop and mix foods. When
done, cover steam tray with lid. Use protection for your hands to avoid direct
contact with steam being released by unit.
7. Unit will signal every 15 minutes and turn off at one hour. It will then signal
and go back into standby mode with the Start/Stop Button light blinking.
Please check food for readiness every 15 minutes. See chart bellow for
approximate cooking times of different food types.
NOTE: If water dries out before one hour, unit will signal and automatically switch off.
NOTE: You can interrupt at any time by pressing Start/ Stop Button . Unit will go
back into standby mode with the Start/Stop Button light blinking.
Allow appliance to cool completely before cleaning. Disconnect plug from wall
electrical outlet when not in use.
CKSTRC9030S_CKSTRC9030R_20SEPM1 (LA).indd 9 CKSTRC9030S_CKSTRC9030R_20SEPM1 (LA).indd 9
will start blinking.
will start blinking.
and then press Start/Stop Button to start
E n g l ish -9
3/4/20 14:35 3/4/20 14:35