LG WT25 TS6H Series Owner's Manual page 73

Using Washer Cycle
Inicio Remoto (Remote Start)
Use a smartphone to control your appliance
remotely. You can also monitor your cycle
operation so you know how much time is left in the
cycle.
To Use Inicio Remoto (Remote Start):
1
Press the Power button.
2
Put the laundry in drum.
3
Press and hold Inicio Remoto (Remote
Start) button for 3 seconds to enable
Inicio Remoto (Remote Start) function.
4
Start a cycle from the LG SmartThinQ
application on your smart phone.
NOTE
• Once the Inicio Remoto (Remote Start)
mode is enabled, you can start a cycle
from the LG SmartThinQ smartphone
application. If the cycle is not started, the
machine will wait to start the cycle until it is
turned off remotely from the application or
the Inicio Remoto (Remote Start) mode is
disabled.
• When Inicio Remoto (Remote Start) is turned
on, the door is automatically locked.
To Disable Inicio Remoto (Remote Start):
When the Inicio Remoto (Remote Start)
is activated, press and hold
Inicio Remoto (Remote Start) button for 3
seconds.
Ciclo Descargado (Download Cycle)
Download new and special cycles that are not
included in the basic cycles on the appliance.
Appliances that have been successfully registered
can download a variety of specialty cycles specific
to the appliance.
Only one cycle can be stored on the appliance at
a time.
Once cycle download is completed in the
appliance, the product keeps the downloaded
cycle until a new cycle is downloaded.
Wireless LAN Module Regulation
The operation is subject to the following two
conditions:
(1) this device may not cause harmful interference
and
(2) this device must accept any interference
received,
including interference that may cause undesired
operation of the device.
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained
in this product, please visit http://opensource.lge.
com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping, and handling) upon email request
to opensource@lge.com. This offer is valid for a
period of three years after our last shipment of this
product. This offer is valid to anyone in receipt of
this information.
Smart Diagnosis™ Using a Smart Phone
• For appliances with the
Use this function if you need an accurate diagnosis
by an LG Electronics customer information centre
when the appliance malfunctions or fails.
Smart Diagnosis™ can not be activated unless the
appliance is connected to power. If the appliance
is unable to turn on, then troubleshooting must be
done without using Smart Diagnosis™.
EN
c d
or logo
29