D-Link DCS-4802E User Manual page 26

Vigilance full hd outdoor poe mini dome camera

Hide thumbs Also See for DCS-4802E:

Table of Contents

Section 3: Configuration

This wizard will guide you through a step-by-step process to configure your new D-Link

Camera and connect the camera to the internet. Click Next to continue.

Select how the camera will connect to the Internet.

If your camera is connected to a router, or you are unsure how your camera will

connect to the Internet, select DHCP Connection.

Select Static IP if your Internet Service Provider has provided you with connection settings, or

if you wish to set a static address within your home network. Enter the correct configuration

information and click Next to continue.

If you are using PPPoE, select Enable PPPoE and enter your user name and password.

Click Next to continue.

D-Link DCS-4802E User Manual

Internet Connection Setup Wizard

Table of Contents