Table of Contents
Advertisement
Chapter 3 Web GUI Functions
3.4 Configuration
A confirmation dialog box appears.
2.
Click the [OK] button.
A test trap is sent to all of the set trap destinations.
The [SNMP Trap Settings] screen displays the following items.
Display Item
IP Address
SNMP Version
Community/User
Auth
Auth passphrase
Auth passphrase (confirm)
Priv passphrase
Priv passphrase (confirm)
Engine ID
3.4.6
SSL Certificate Configuration
On the [SSL Certificate Configuration] screen, you can check the registered contents of an installed SSL
certificate. You can also upload the SSL certificate issued by an external agency.
Note
-
The default status does not allow https connection to the BMC. https connection is allowed when the
BMC has uploaded an SSL certificate through an http connection.
Table 3.29 Display Items on the [SNMP Trap Settings] Screen
Displays the IP addresses of SNMP trap destinations.
Displays the SNMP version.
Displays an SNMP community string when the version is SNMPv1 or SNMPv2,
and displays a user name when it is SNMPv3.
Displays security levels.
- noauth: Do not use the authentication function.
- auth: Use the authentication function.
- priv: Use the authentication and privacy functions (data encryption).
Displays an authentication password if "auth" or "priv" is specified in [Auth].
Displays an encryption password if "priv" is specified in [Auth].
Displays engine IDs.
Description
39
C120-0091-02EN
Advertisement
Table of Contents
