Chapter 3 Web Gui Functions - Fujitsu PRIMEHPC FX1000 User Manual

Chapter 3 Web GUI Functions
Chapter 3 Web GUI Functions
This chapter shows Web GUI categories and screens, and describes their functions.
The following table lists BMC screens.
Category Name
Server Status FRU Information
CMU Information
System Event Logs -
Power Control -
Configuration Chassis Settings
Services
Network Settings
Time Settings
SNMP Trap Settings
SSL Certificate
Configuration
Maintenance Maintenance
Firmware Update
REMCS
Table 3.1 Web GUI Screens
Screen Name
Display
Display
Display/Operate
Display/Operate
Display/Operate
Display/Operate
Display/Operate
Display/Operate
Display/Operate
Display/Operate
Display/Operate
Display/Operate
Display/Operate
Authority
Display the serial number, part number, and
other information on each unit.
Display the CMU/node status.
- Instruct that a snapshot be collected. /
Download a snapshot.
- Download an environment log.
- Display System Event Log information.
- Display another supplementary log.
- Instruct that node power be turned on/off.
- Display the status of each node.
- Display/Set the FX700 main unit name.
- Display/Set the altitude.
- Display/Set whether the http/https/ssh/
snmp service is enabled/disabled.
- Display/Set the port number of each service.
- Display/Set an IP address and net mask.
- Display/Set routing information.
- Display/Set the date and time.
- Display/Set time zone information.
- Instruct synchronization with the NTP server.
- Display/Set the NTP server.
Display/Set SNMP traps.
- Upload a signed Web server certificate.
- Upload a private key of a Web server.
- Display CSR content.
- Instruct that maintenance mode be
started/ended.
- Instruct that the CMU/PSU be powered
on/off.
- Display the current firmware version.
- Upload a firmware image.
- Apply a firmware image.
- Display the [REMCS] screen
- Set REMCS
10
Description
C120-0091-02EN