JETWAY NF596 Technical Manual page 36

Use this item to select an optimal setting for super IO device.
Serial Port FIF0 Mode
The optional settings are: [16-Byte FIF0]; [32-Byte FIF0]; [64-Byte FIF0]; [128-Byte
FIF0].
OS Select for Serial Port
The optional settings: [Windows]; [LINUX].
ERP Support
The optional settings: [Disabled]; [Enabled].
This item should be set as [Disabled] if you wish to have all active wake-up
functions.
Case Open Detect
This item controls detect case open function.
The optional settings: [Disabled]; [Enabled].
PS2 KB/MS Connect
Use this item to select PS2 connect primary device.
The optional settings: [Keyboard First]; [Mouse First].
WatchDog Reset Timer
Use this item to enable or disable WatchDog Timer reset function. When set as
[Enabled], the following sub-items shall appear:
WatchDog Reset Timer Value
User can set a value in the range of [10] to [255].
WatchDog Reset Timer Unit
The optional settings are: [Sec.]; [Min.].
WatchDog Wake-up Timer
This item support WDT wake-up while ERP function is set as [Enabled].
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
WatchDog Wake-up Timer Value
The setting range is [10] ~ [4095] seconds, or [1] ~ [4095] minutes.
31