Table of Contents
Advertisement
3. Press the Setup button.
4. Select the Extended Thickness tab.
5. Change the value of the Camera A-B field. Normally, only positive values should
be used.
6. Run test scans and readjust the values until you are satisfied that the lines are
stitched correctly.
7. Scanning thick originals can give distorted results at the top and bottom edges of
the image, where the edge meets the scanner's rollers. You can omit edge
distortion by letting the scanner skip the leading and trailing edges. Check the
box Use extended thickness paper handling to enable skipping of the image
edges.
8. Click OK to accept your settings.
9. Repeat the above steps until you are satisfied with the results.
Note:
Auto-adjustment of the scanner's light profile, stitching and other functions only
take place with the insertion slot in the Normal position. When in extended
media thickness position, the last auto-adjustment is stored and utilized. This
means that you should from time to time, and especially when powering on the
scanner, return to the Normal position to allow it to auto-adjust.
Color Reproduction for the HP Large Format Color Copiers family: cc800ps, 815mfp, 5500mfp and 4200 scanner
57/57
Advertisement
Table of Contents
