Abit AN52S User Manual page 36

RAID Configuration
Click <Enter> key to enter its submenu:
OnChip SATA Mode
x - SATA1 RAID
x - SATA2 RAID
x - SATA3 RAID
x - SATA4 RAID
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values
OnChip SATA Mode
This item determines the mode for OnChip SATA.
[IDE]: The on-chip SATA served as IDE mode.
[RAID]: The on-chip SATA served as RAID mode.
- SATA1 RAID ~ SATA4 RAID
This item allows you to enable or disable the RAID function for each of the SATA 1 ~ SATA4
port individually.
Back to Integrated Peripherals Setup Menu
Init Display First
This item allows you to choose the primary display card.
OnChip USB
This option enables or disables the USB controller.
- USB Keyboard Support
Select [BIOS] for the legacy operating system (such as DOS) that does not support USB
keyboard.
- USB Mouse Support
Select [BIOS] for the legacy operating system (such as DOS) that does not support USB
mouse.
OnChip Audio Controller
This option enables or disables the audio controller.
2-12
Phoenix – AwardBIOS CMOS Setup Utility
RAID Configuration
IDE
Disabled
Disabled
Disabled
Disabled
F6: Fail-Safe Defaults
Item Help
F7: Optimized Defaults
AN52S/AN52