Installation Procedure; Apply Foam Tape; Install Backwall Trim - Bosch HDI7282U Installation Instructions Manual

Installation Procedure

Apply Foam Tape

Install Backwall Trim

(Optional)
Apply foam tape to underside of cooktop trim in one continuous piece.
Note:
This step is only required if the countertop does not connect behind
the range (i.e.; when replacing a free-standing range). If backwall
trim and attachment screws are required, they may be ordered from
the service center by calling 800-944-2904 at no charge for up to one
year after purchase date of your Slide-In Range. When ordering,
refer to Service Backwall Trim Kit part no. 652010. See "Cabinet
Requirements" on page 8 for more information
Install 2 screws through holes in trim and in range backwall. See Figure 9:
Backwall Trim Strip and Figure 10: Install Backwall Trim Strip
Backwall
Trim Strip
Figure 9: Backwall Trim Strip
Back of Range
Figure 10: Install Backwall Trim Strip
Installation
English 11