Samsung HG22NE690 Series Installation Manual page 37

Hotel TV Function
Category
DRM Mode
DRM
PI AES Data
PI AES Log
View PI AES Log
Self Diagnosis
Self Diagnosis for HTV
SW Update
Service Pattern
System
ATV Cable AGC Gain
DTV OpenCable AGC Gain
Sound Bar Out
Contact Samsung
Standby LED
✎ REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets
you deliver TV firmware updates, cloning data, channel mapping changes, REACH contents, and TICKER contents
through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only in
standalone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the
REACH server product for more operating information.
Item
Configures DRM support.
OFF: Turns off DRM support.
LYNK DRM: Select to turn on S-LYNK DRM CAS support only.
Pro:idiom: Select to turn on Pro:Idim CAS support only.
LYNK DRM,PI: Select to have the TV support S-LYNK DRM CAS and Pro:Idiom CAS.
Displays the current state of Pro:Idion AES
y ON: Output of Pro:Idiom AES log is enable.
y OFF: Output of Pro:Idiom AES log is disable.
If this item is entered into, the Pro:Idiom AES log is displayed.
y Enter Self Diagnosis Menu.
Picture Test: Use to check for picture problems. If the problem appears in the test picture,
select Yes and follow the directions on the screen.
for TV
y Sound Test: Use the built-in melody sound to check for sound problems. If the problem
occurs during the test, select Yes and follow the directions on the screen.
Lets you check the state of Pro:Idiom and its communication with the SI STB or SBB. If you
have any problems with the Pro:idiom encryption channel or the communications with the
SI STB or SBB, use this diagnosis function. If Pro:Idiom DTV Channel Key Loss appears to
have failed and the Pro:Idim encryption channel has failed to play content, first check the
broadcasting systems related to Pro:Idiom encryption. If your broadcasting system does
not have a problem, contact Samsung Service. If STB SI Vendor Setting appears to have
failed and communication with the SI STB or SBB has failed, first check your SI STB or SBB.
If your SI STB or SBB does not have a problem, contact to Samsung Service.
Lets you upgrade the TV SW with a USB memory stick. See Page 48.
Lets you check the state of the TV picture by displaying picture test patterns. Press the
Menu button to turn off the test patterns and exit.
Lets you control the AGC gain of the analog cable channels. Don't change the default value
unless problems occur.
Lets you control the AGC gain of the digital cable channels. Don't change the default value
unless problems occur.
If the Samsung Sound Bar device is connected to this TV, this item lets you to select where
the TV sound is outputted when the TV is turned on.
y ON: When the TV is turned on, the TV sound is automatically outputted in the Sound Bar
device only.
y OFF: When the TV is turned on, the TV sound is automatically outputted in the TV speaker
device only.
See Page 49.
Display the web site of related Samsung service center, software version, and Mac
address information.
When the TV is in standby mode, you can configure the settings of external LED.
y ON: The LED is on.
y OFF: The LED is off.
TV Reset Returns all settings on the TV to their factory defaults.
Description
37
English