Samsung HG22NE690 Series Installation Manual page 33

Menu Items
To Enter this menu: Press the
To exit from this menu: Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any
changes you made are saved.
✎ The menu item does not support depending on the models.
Hotel TV Function
Category
Hospitality
Hospitality Mode
Mode
SI Vendor
Power On Channel
Power On Channel Num
Power On Channel Type
Power On Volume
Power On
Power On Volume Num
Min Volume
Max Volume
Power On Source
Power On Option
Channel Setup
Channel Editor
Channel
Mixed Channel Map
Dynamic SI
Mychannel
Genre Editor
MUTE → 1 → 1 → 9
Item
Select Hospitality mode.
y Interactive mode: TV works with an SI STB or SBB.
y Standalone mode : TV works alone, without an SI STB or SBB.
y Interactive mode: Samsung / OCC / MTI / Nstreams / Enseo / Cardinal / Guestek /
SeaChange / MDC / Innvue
SI Vendor
y Standalone mode: OFF / Smoovie / SSCP
Set the default values that will be applied when the TV is turned.
y User Defined: Lets you set Power On Channel and Channel Type manually. See Power On
Channel and Channel Type below.
y Last Saved: If you select this item, when the TV is turned on, it displays the channel it was
displaying when it was turned off.
When the TV is turned on, it switches automatically to this channel.
y Select channel band: AIR (analog air band), DTV (digital air band), CATV (analog cable
band), CDTV (digital cable band).
y User Defined: Lets you set the Power On Volume manually. See Power On Volume below.
y Last Saved: When the TV is turned on, it returns to the volume that had been set when the
power had been turned off.
The TV turns on with this Volume Level in Stand Alone Hospitality mode.
The minimum Volume Level the user can set in Stand Alone Hospitality mode.
The maximum Volume Level the user in Stand Alone Hospitality mode.
Select the input source the TV displays when turns on.
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
y Last Option: Returns to its last Power state. If it was in Stand-by, it returns to Standby. If it
was on, it turns on.
y Power ON: When the power returns, the TV turns on.
y Standby: When the power returns, the TV enters the Standby mode.
Gives you direct, immediate access to some of the Channel menu functions on the user
Channel menu such as Auto Program, Antenna selection, etc.
The Channel Editor lets you edit the channels stored in the TV's memory. Using Channel
Editor you can:
y Change the channel numbers and names, and sort the channels in your desired channel
number order.
y Apply the video mute to channels you select. The video mute blanks out the video from a
channel and outputs only the sound while displaying a speaker icon on the screen.
The Channel Editor also lets you view information about each channel easily, without your
having to display each channel directly.
This Feature enables showing/browsing all antenna type (Air/Cable or Satellite) channels
at the same time.
y ON: When ON, guests can access the complete Channel Map irrespective of the selected
antenna type. The Channel list will also populate Air as well Cable type channels.
y OFF: When OFF, guest can access the Channel Map corresponding to the selected antenna
type [AIR/CABLE or Satellite] only. The Channel list/Editor will only show the selected
antenna type channels.
y ON: Check the DTV Programme channel number. (the TV channel editor is inaccessible)
y OFF: Do not check the DTV Programme channel number. (the DTV channel editor is
accessible, but additional channel Programme number update is not supported)
Enable or disable the My Channel feature.
Edith the genre for channels. (Available when My Channel is On)
→ ENTERE buttons in order.
Description
33
English