Handlebar Switches; Throttle Lever - Yamaha YFM90RYXJ Owner's Manual

EBU18066

Handlebar switches

1
4
2
1. Engine stop switch "
2. Start switch " "
EBU18081
Engine stop switch "
Set this switch to "
The engine stop switch controls the ignition and
stops the engine when it is running. Use this
switch to stop the engine in an emergency situa-
tion. The engine will not start or run when this
switch is set to "
/ "
/ "
" before starting the engine.
".
EBU18102
Start switch " "
Push this switch to crank the engine with the start-
er. See the starting instructions on page 6-1 prior
to starting the engine.
EBU18283

Throttle lever

Once the engine is running, pushing the throttle le-
ver will increase the engine speed.
Regulate the speed of the ATV by varying the
throttle position. Because the throttle is spring-
loaded, the ATV will decelerate, and the engine
will return to an idle any time the throttle lever is re-
leased.
1. Throttle lever
4-2
1