Remote Controller; Changing The Battery - Telefunken TF-DVBT219 Instruction Manual

Multimedia player with dvb-t2 receiver
Table of Contents

Advertisement

Available languages

Available languages

Operation

Remote controller

POWER: Switch the receiver between standby
and working mode.
MUTE: To switch on/off volume.
FORMAT: Quick change receiver's output
resolution by one key.
ASPECT: Switch Aspect Ratio quickly.
FAV: Displays your favorite channels list; press
FAV again to access to the other favorite lists.
TIMESHIFT: Begin to timeshift.
RED (TTX): Function key (Switch on teletext, if
current channel has this option, and use EXIT key
to quit teletext).
GREEN (SUB): Function key (Display subtitle
options (availability depends on the channel)).
6
YELLOW (ZOOM): Function key (Zoom ).
BLUE (TIMER): Function key (Enter Schedule menu).
EPG: Shows the electronic program guide.
INFO: Display information about the current channel when playing
channel or show the receiver's software and hardware info when
main menu is showing.
UP/DOWN (CH+/-): To switch channel or move the cursor.
LEFT/RIGHT (VOL+/-): To increase/decrease volume; Press to
move the cursor.
OK: To confirm current setting or display channel list in
no-menu mode.
MENU: Display main menu on TV screen, and press again to
hide the menu.
EXIT: Use this key to quit current menu.
(PLAY/PAUSE) : Switch pause/play mode when playback or
timeshift.
(STOP): Stop record, timeshift or stop playback multimedia file.
: Fast backward to view the current playing multimedia file or
timeshift channel.
: Fast forward to view the current playing multimedia file or
timeshift channel.
): Start to recording when USB disk is available (Go to
REC (
the previews file in file list).
RADIO (
): Switch between TV and Radio mode (Go to the next file
in file list).
0~9: Numeric keys.
RECALL: Go back to the previous viewed channel.
AUDIO: Switching audio language.

Changing the battery

1. Remove the battery compartment cover
on the back of the RC.
2. Insert two AAA batteries into the battery
compartment making sure that the correct
polarity is observed.
3. Install the cover back.
• The RC should be pointed at remote
sensor within 8 meters and within 30 degrees
at the left or the right side.
• Take the battery out of the RC if it is not
used for a long time.
• Do not mix new and used batteries or
different types of batteries. Weak batteries can
leak and severely damage the RC.
• Do not expose the RC to shock, liquids,
and do not place it in an area with high
humidity.

Advertisement

Table of Contents
loading

Table of Contents