Super Cooling; Clean Lock; Eco Mode; Self-Test - Thermador T36IR900SP Use & Care Manual

Super cooling

Super cooling cools the refrigerator compartment as
cold as possible.
Switch on super cooling, e.g.:
Before placing large quantities of food into the
■
compartment
For cooling drinks quickly
■
Note: When super cooling is switched on, increased
operating noises may occur.
After approx. 6 hours, the appliance switches to
normal operation.
Switching on super cooling:
To open the menu for setting the temperature,
1.
press the : button.
Press the / button.
2.
When super cooling is switched on, the symbol /
appears on the display.
Confirm the selection by pressing the 8 button. If
3.
the button is not pressed, the appliance stores
the setting and automatically returns to the main
screen after a few seconds.
Switching off super cooling:
To open the menu for setting the temperature,
1.
press the : button.
Press the > button.
2.
When super cooling is switched off, the symbol /
disappears from the display.
Confirm the selection by pressing the 8 button. If
3.
the button is not pressed, the appliance stores
the setting and automatically returns to the main
screen after a few seconds.

Clean lock

You can use this function to switch off the touch
function of the controls for 10 seconds. During this
time you can clean the display.
~ "Cleaning the display" on page 17
Press " button to open the Settings menu.
1.
Press < button.
2.
The cleaning display appears, and the countdown
starts.
Operating the appliance en-us
Automatic clean lock
You can use this function to select whether the
automatic clean lock is switched on automatically
when the door is opened.
Press " button to open the Settings menu.
1.
Press < button to move to the menu item
2.
Appliance settings.
Press 8 button.
3.
Press > button to move to the menu item
4.
Automatic clean lock.
To change the setting, press : button.
5.

Eco mode

Eco mode switches the appliance to energy-saving
operation.
The appliance automatically sets the following
temperatures:
Refrigerator compartment: +43° F (6° C)
■
Cool-fresh container: +32° F (0° C)
■
Switching Eco mode on or off
Press the " button to open the Settings menu.
1.
Use > button to move to the menu item Eco
2.
mode.
Press </= button.
3.
The temperature is changed, and the display shows
the new temperature. When Eco mode is switched
off, the recommended temperature is set.
Note: You can also switch Eco mode on or off by
adjusting the temperature with the +/- buttons.

Self-test

This function can be used to start fault analysis on
your appliance.
~ "Appliance self-test" on page 21

Setting the brightness of the control panel

Press " button to open the Settings menu.
1.
Press < button to move to the menu item
2.
Appliance settings.
Press 8 button.
3.
Press : button to open the menu item
4.
Brightness.
Use < > buttons to set the required brightness.
5.
Press 8 button.
6.
The setting is saved.
Press ; button to exit the menu.
7.
13