Table of Contents
Advertisement
ADJUSTMENT [LCD Color Television] ASIA_EU
5) Initialization progress dialog including model name and panel vendor is shown.
Progress status is "WRITING".
6) Progress status is changed "OK" and power cycle (automatically). Then QA02 initialization has
been completed.
7) Enter the service mode and select version check mode. Confirm if model name and model id set
is correct. If not, repeat steps 1) to 6).
Note:
In case initialization by setting wrong MODEL ID is done, there is a possibility of abnormal
display.
8) Set I2C check function of TVOP to enable.
9) Check the picture carefully. If necessary, adjust any adjustment item above.
Perform "Auto tune" on the owner's manual.
MODEL ID (HEX)
0x01
32XV505D/503D/504D
0x02
0x03
37XV505D/503D/504D
0x04
0x05
42XV505D/503D/504D CMO
0x06
32XV500P/501P
0x07
0x08
37XV500P/501P
0x09
0x10
42XV500P/501P
0x11
42XV505D/503D/504D LPL
0x12
42XV500P/501P
0x13
0x14
0x15
0x16
0x17
file://C:\Documents and Settings\Serge\Bureau\toshiba_37xv505d-02_[ET]\37XV505...
Model name
Panel vendor
SAM
IPS
LPL
IPS
SAM
IPS
LPL
IPS
CMO
LPL
Page 9 sur 20
16/07/2010
Advertisement
Table of Contents
