Table of Contents
Advertisement
ADJUSTMENT [LCD Color Television] ASIA_EU
(Refer to Initialization of Memory Data of QA02 and setting data of signal board.)
Adjusting the Data
Pressing of VOLUME
The variable range depends on the adjusting item.
I2C Bus Off
Turn off I2C communication between IC700 and IC400.
1) Press and hold the CALL button on the remote control, then press the Volume
the TV.
2) Display "BUS Off" OSD.
3) I2C communication turned off.
Note:
To return Bus on status, press and hold the CALL button on the remote control, then press the
Volume
+ button on the TV again. TV will be turned off and automatically turned on, then
status will be Bus On.
Setting TVOP
Enter to service mode and select menu of TVOP by pressing P
adjustment menu. After selecting TVOP, press
enable as below.
TVOP
FUNCTION DESCRIPTION
D5 (bit5) I2C check between IC700 and IC400. (WDT) Disable Enable
Setting Panel Option Data
file://C:\Documents and Settings\Serge\Bureau\toshiba_37xv505d-02_[ET]\37XV505...
+/- button will change the value of data in the range from 00H to FFH.
or P
during display of
+ or
- to set I2C check function to disable or
1
0 (Normal)
Page 5 sur 20
+ button on
16/07/2010
Advertisement
Table of Contents
