RM-509; RM-510; RM-511
System Module
Internal audio
The internal audio components are used in these modes:
Microphone
Earpiece
Speaker
Internal microphone
The digital internal microphone (B2100) is located near the BB shield. To save current when the microphone
is not needed, its supply voltage is controlled by VDIGIMIC. The Data and Clk lines are directly connected to
RAP3Gv4.
Issue 2
Figure 45 Audio block diagram
Hand portable (HP) mode
X
X
COMPANY CONFIDENTIAL
Copyright © 2009 Nokia. All rights reserved.
Internal hands free (IHF) mode
X
X
Page 5 –21