Horn Switch; No-Wake Mode/Cruise Assist Switch - Yamaha AR195 Owner's/Operator's Manual

AR195/AR190
1 Anchor light
SX195/SX190
1
1 Anchor light

Horn switch

Push this switch to activate the horn. The horn
can be used to signal other boats as required
by the "Rules of the road". (See page 19 for
more information.)
1
Instrument operation

No-wake mode/cruise assist switch

This switch activates and sets the no-wake
mode, cruise assist, and reverse RPM con-
trol.
CTSY
NAV/ANC
LIGHTS
1 No-wake mode/cruise assist switch
To operate the no-wake mode and cruise as-
sist, see the following sections. To activate
the reverse RPM control, see "Reverse RPM
control" on page 51.
No-wake mode
The no-wake mode is useful for operating the
boat at a steady speed with a minimal wake.
This is especially convenient when traveling
in harbors, channels, or other areas posted
with low speed limits as "no wake zones".
The no-wake mode can be used only when
the engine is operating at idle speed.
To activate the no-wake mode:
(1) Put the remote control lever in the TDE
position or forward position so that the
engine is operating at idle speed.
1
HORN
49