Table of Contents
Advertisement
Troubleshooting
Checkpoints
If the dryer operates abnormally, first check the list of problems in the table below and
try the suggested actions.
Problem
Does not run.
Does not heat.
Does not dry.
Untitled-1 45
• Make sure the door is latched shut.
• Make sure the power cord is plugged into a live electrical
outlet.
• Check your home's circuit breakers or fuses.
• Press or tap Start/Pause (Hold to Start) again if the door is
opened during a cycle.
• Clean the lint filter.
• Check your home's circuit breakers or fuses.
• Some cycles do not require heating. Check the selected
cycle again.
• For a gas dryer, make sure the gas supply is on.
• Clean the lint filter and exhaust duct.
• The dryer may have moved into the cool-down phase of
the cycle.
• Check all of the above, plus...
• Make sure the exhaust hood outside your home can open
and close freely.
• Check the exhaust system for lint buildup. Ducting should
be inspected and cleaned annually.
• Use a 4" rigid metal exhaust duct.
• Do not overload. 1 wash load = 1 dryer load.
• Dry heavy items and light weight items separately.
• Large, bulky items, such as blankets or comforters, may
require repositioning to ensure even drying.
• Make sure that your washer is draining properly and
extracting adequate water from the load.
• The load may be too small to tumble properly. Add a few
towels and restart the dryer.
• The load may be too large to tumble properly. Remove
some items and restart the dryer.
• Clean the lint filter.
• Turn the Eco Dry function off. To save energy, Eco Dry uses
a fan without heating and it takes longer to dry items.
Action
English 45
11/22/2018 12:10:55 PM
Advertisement
Table of Contents
