Table of Contents
Advertisement
Smart Care
To enable this function, you must first download the SmartThings app at the Play Store
or the App Store and install it on a mobile device featuring a camera function. The Smart
Care function has been optimized for Galaxy & iPhone series (applicable models only).
1. When the dryer detects an issue to check, an information code appears on the display.
To enter Smart Care mode, press Smart Care.
2. The dryer starts the self-diagnosis procedure and displays an information code if a
problem is detected.
3. Run the SmartThings app on your mobile device, and then tap Smart Care.
4. Put the mobile device close to the dryer's display so that the smartphone camera and
the dryer face each other. Then, the information code will be recognized automatically
by the app.
5. When the information code is recognized correctly, the app provides detailed
information about the problem with applicable solutions.
NOTE
• The function name, Smart Care, may differ depending on the language.
• If the dryer reflects light on the display, the app may fail to recognize the information
code.
• If the app fails to recognize the information code, you can enter the code manually on
the app.
Untitled-1 43
English 43
11/22/2018 12:10:55 PM
Advertisement
Table of Contents
