Table of Contents
Advertisement
B
Untitled-1 29
6. Locate and remove the 10 screws as
shown. Note that screw B (x2) is longer
than the others.
B
7. Remove the glass holder, and switch
the positions of:
a. the hinge cover and the door handle.
b. the hinge holder and the glass-guide
holder
8. Remove the door lever, and then move
it to the other side as shown.
9. Remove the hole cover (C), and then
insert and tighten the glass holder using
the removed 10 screws.
10. Install the hole cover on the opposite
side as shown.
C
English 29
11/22/2018 12:10:52 PM
Advertisement
Table of Contents
