Table of Contents
Advertisement
Power/Protect LED
Power LED illuminates red when the unit is turned
on. Protect LED illuminates yellow if a short cir-
cuit or to low of an impedance is detected at the
speaker connections. The amplifier will automati-
cally shut down if this occurs.
4
Punch EQ
This control is a narrow band adjustment variable from 0dB to
+18dB @ 45Hz with a Gyrator based Punch EQ that eliminates
frequency shift with boost.
Speaker Terminals
The heavy duty, nickel-plated set-screw wire con-
nectors (+ and -) will accommodate 8 AWG.
Remote Punch Level Control
Variable Crossover
Is a built-in 24dB/octave Butterworth
filter with a crossover point variable
from 50Hz to 500Hz.
When connected, the "Gain Control" is linked and allows
you to remotely control the output level of the amplifier
from the dash or center console.
Advertisement
Table of Contents
