Manage Ethernet Port Aggregation To A Lan Device - NETGEAR Nighthawk AXE1000 User Manual

Nighthawk AXE1000/AXE11000 Tri-Band WiFi 6E Router
4. Select ADVANCED > Advanced Setup > Wireless Settings.
The Wireless Settings page displays.
5. Select the use other operation mode check box.
6. Select the Enable Bridge Mode radio button.
7. Click the setup bride mode wireless settings button.
The Wireless Settings window opens.
8. Specify the settings of the other router to which this router will connect:
a. Select the wireless network from the menu:
• Wireless Networks (2.4Ghz b/g/n/ax)
• Wireless Networks (5Ghz a/n/ac/ax)
• Wireless Networks (6Ghz a/n/ac/ax)
b. In the Name (SSID) file, enter the wireless network name (SSID).
c. In the Security Options section, select a radio button.
d. If the Password (Network Key) field displays, type the WiFi password (network
key) that you use to connect wirelessly to the other router.
9. Click the Apply button.
The window closes and you are returned to the main Wireless Settings page.
10. Click the Apply button on the main Wireless Settings page.
Your settings are saved.
Manage Ethernet Port Aggregation to a LAN
Device
Ethernet aggregation lets you aggregate two Ethernet ports on your router to improve
the aggregated file transfer speed. Ethernet port aggregation is also referred to as link
aggregation, teaming port, and port trunking.
Note: For information about Internet (WAN) port aggregation, see Get Multi-Gig Internet
With Internet Port Aggregation on page 31.
To set up Ethernet port aggregation to a LAN device that is configured for 802.3ad Link
Aggregation Control Protocol (LACP), first configure Ethernet port aggregation for
Manage Network Settings 96 User Manual