Samsung RF62U Series User Manual page 6

setting up your freezer
GETTING READY TO INSTALL
THE REFRIGERATOR
Congratulations on your purchase of this Samsung
Refrigerator. We hope you enjoy the state-of-art
features and effi ciencies that this new appliance
offers.
Selecting the best location for the
Refrigerator
150mm
100mm
100mm
• A location with easy access to the water supply.
• A location without direct exposure to sunlight.
• A location with level (or nearly level) fl ooring.
• A location with enough space for the Refrigerator
doors to open easily.
• Allow suffi cient space to the right, left, back and
top for air circulation. If the Refrigerator does not
have enough space, the internal cooling system
may not work properly.
• Please ensure that appliance can be moved freely
in the event of maintenance & service.
First thing! Make sure that you can easily move
your Refrigerator to its fi nal location by measuring
doorways (both width and height), thresholds,
ceilings, stairways, etc.
817mm
RF62* : 1172mm
RF67* : 1222mm
1492mm
Drawer-Type Drawer-Type
• Allow clearance to the right, left, back and
top when installing. This will help reduce
power consumption and keep your energy
bills lower.
• If you install the Refrigerator where is below 10ºC,
it may not function in optimum level.
• Do not locate the refrigerator where the wet
condition.
06_ setting up 06_ setting up
DA68-01868T.indb 섹션2:06 DA68-01868T.indb 섹션2:06
150mm
100mm
100mm
817mm 817mm
665mm
RF62* : 1125mm RF62*:1455mm
RF67* : 1175mm RF67*:1505mm
1492mm
Swing-Type Swing-Type
When moving your refrigerator
To prevent fl oor damage be sure the front
leveling legs are in the up position(above the
CAUTION
fl oor). Refer to 'Adjusting the doors' in the
manual (on page 13)
Flat-blade
Control Lever
screwdriver(-)
FLOORING
For proper installation, this refrigerator must be
placed on a level surface of hard material that is the
same height as the rest of the fl ooring. This surface
should be strong enough to support a fully loaded
refrigerator, or approximately 106kg.
To protect the fi nish of the fl ooring, cut a large
section of the cardboard
carton and place under
the refrigerator where
you are working. When
moving the refrigerator,
be sure to pull it straight
out and return it to
position by pushing it
straight in.
INSTALLATION OF THE WATER
LINE (AUTO ICE MAKER
MODEL)
Before you install the water line
• The water line installation is not warranted by the
refrigerator manufacturer.
So before you install the water line, read the
whole steps for installing and follow these
instructions carefully to minimize the risk of
expensive water damage.
• Banging pipes (water banging in the pipes) in
house plumbing can cause damage to fridge
parts and lead to water leakage or fl ooding. Call
a qualifi ed plumber to correct the problem before
installing the water supply line to the fridge.
2011.7.4 9:22:2 PM 2011.7.4 9:22:2 PM