Samsung RF62U Series User Manual page 12

13. Place the hole in the
bottom of the freezer door
over the low hinge.
17. Place the hole in the
bottom of the left door
over the middle hinge.
20. Insert and tighten the
ground screw into the left
and right upper hinges with
a philips screwdriver(+).
12_ setting up 12_ setting up
DA68-01868T.indb 섹션2:12 DA68-01868T.indb 섹션2:12
14. Replace the middle hinge connected to the freezer.
15. Insert and tighten the screw into the left and right middle
hinges with a philips screwdriver(+). Insert and tighten the 2
hex head bolts into the left and right middle hinges with an
allen wrench(Ø5mm).
16. Replace the cap on the middle hinge.
18. Insert the left upper hinge
shaft into the hole on the
corner of the fridge door.
21. Connect the electronic
wire on the top of the
refrigerator.
19. Insert the upper hinges
into the holes at the top of
the door.
Insert and tighten the 3
hex head bolts into the left
and right upper hinges with
a socket wrench(10mm).
22. Position the top table in
place. Insert and tighten
the 3 screws into the
top table with a philips
screwdriver(+).
2011.7.4 9:22:8 PM 2011.7.4 9:22:8 PM