Auto Setup - Toshiba D-VR30SG Owner's Manual

Auto Setup

I
If your clock is set to the wrong time zone or
daylight saving, you can adjust these settings
Note
without turning off the Auto Clock Set function.
You do not need to preset the stations if you have
already set them automatically (see Plug & Auto Set Up
on page 24).
Your DVD Recorder & VCR contains a built-in tuner
used to receive television broadcasts.
You must preset the stations received through the tuner.
This can be done:
• Plug & Auto Set up (see page 24)

• Auto Setup

• Manual Setup (see page 27~28)
With the unit in Stop mode/No Disc mode, press
1
the MENU button.
Press the ...† buttons to select Setup, then press
2
the OK or √ button.
Press the ...† buttons to select Install, then press
3
the OK or √ button.
No Disc
Programme
Auto Setup
Manual Setup
Setup
TV System
VIDEO Output CH
MOVE OK
Press the ...† buttons to select Auto Setup,
4
then press the OK or √ button.
• The DVD Recorder searches for the stations
according to a preset preference list correspond-
ing to the country that you have selected.
No Disc
Country Selection
A NL
B I
DK N
FIN P
D E
MOVE OK
26 - English
Install
√ √
√ √
: G
: Ch 36
√ √
RETURN EXIT
Auto Setup
S PL
CH CZ
TR Others
GR
HU
RETURN EXIT
• Refer to following abbreviation table when selecting
"Country".
A(Austria) NL(Netherlands) S(Sweden)
B(Belgium) I(Italy)
DK(Denmark) N(Norway)
FIN(Finland) P(Portugal)
D(Deutschland) E(Spain)
œ √ buttons to select your "Country",
... ... † †
Press the
4
then press the OK or √ button.
The message "Your data will be lost. Press [OK] to
continue, [MENU] to exit." is displayed.
No Disc
Programme
Auto Setup
Manual Setup
Setup
Your data will be lost.
Press [OK] to continue, [MENU] to exit.
MOVE OK RETURN
5 Press the OK button to start the auto scanning.
No Disc
Programme
Setup
Please wait.....
Scanning...
Stop
MOVE OK RETURN
• The first frequency band is scanned and the first
station found is displayed and stored.
And the DVD Recorder & VCR searches for the
second station and so on.
• When the automatic scanning procedure has
finished, the DVD Recorder & VCR switches
automatically to programme 1.
• The number of stations automatically stored by
the DVD Recorder & VCR depends on the
number of stations that it has found.
6 If you wish to cancel the auto scanning before the
end, press the OK button.
• The time and date are set automatically from the
broadcast signal. If the signal is weak or
ghosting occurs, the time and date may not be
set automatically.
• Once the auto scanning procedure has finished,
some stations may have been stored more than
once; select the stations with the best reception
and delete the ones no longer required.
PL(Poland)
CH(Swiss) CZ(Czech)
TR(Turkey) Others
GR(Greece)
HU(Hungary)
Auto Setup
√ √
√ √
EXIT
Auto Setup
50%
EXIT