Table of Contents
Advertisement
Connecting the
Component Video Cable
You will enjoy high quality accurate colour reproduction
images. Component video seperates the picture ele-
ment into black and white(Y), blue(P
to present most clear and clean images.
Connect Component video cables between the COM-
1
PONENT VIDEO OUT JACKS on the rear of the
DVD Recorder & VCR and COMPONENT VIDEO IN
jacks on the rear of the TV.
Connect audio cables between the audio output
2
jacks on the rear of the DVD Recorder & VCR and
AUDIO IN jacks on the rear of the TV.
• Take care to respect the colour coding of the up
and down channels.
COMPONENT INPUT
❚
), red(P
) signals
B
R
Progressive Scan
Your TV must support progressive scan input to
allow to watch progressive scan component video
out. (See page 40)
• For more information about Progressive setting,
refer to the page 40~41.
• Make sure that the colour coded connections
match. That is, the Y, P
jacks of your DVD Recorder & VCR should be
connected to the exact corresponding component
input jacks on your TV. Otherwise, red or blue
images will be displayed on the TV screen.
• Consumers should note that not all high definition
television sets are fully compatible with this product
and may cause artifacts to be displayed in the
picture. In case of progressive scan picture prob-
lems, it is recommended that you switch the con-
nection to the standard definition output. If there
are questions regarding your Toshiba TV set's
compatibility with this DVD Recorder &VCR,
please contact our customer service centre.
See your TV User's Manual to find out if
your TV supports Progressive Scan.
Note
If Progressive Scan is supported, follow the
TV User's instructions regarding Progressive
Scan settings in the TV's menu system.
Depending on your TV, the method of
connection may differ from the illustration
above.
What is "Progressive Scan"?
Progressive scan has twice as many
scanning lines as the interlace output
method has. Progressive scanning method
can provide better and clearer picture
quality.
You must connect the DVD Recorder & VCR
to the component(s) before using the
Progressive Scan feature.
and P
component output
B
R
English - 21
Advertisement
Table of Contents
