Table of Contents
Advertisement
CAUTION. This packaging contains
sharp objects. Take care when
unpacking. Remove the machine,
together with the accessories supplied, from the
packaging. Check carefully to ensure that the
machine is in good condition and account for all the
accessories listed in this manual. Also make sure
that all the accessories are complete.
PACKING CONTENTS
•
Trimmer Assembly (Engine with rear shaft).
•
Drive shaft
•
U handle with controls
•
U handle
•
Cutting line spool
•
Cutting blade
•
Grass deflector
•
Harness
•
Hex key x 2
•
Fuel/Oil mixture bottle
•
Spark plug wrench and screwdriver
•
Spanner
•
Operator's manual.
WARNING. Do not attempt to modify this
product or create accessories not
recommended for use with this product.
Any such alteration or modification is
misuse and could result in a hazardous
condition leading to possible serious
personal injury.
WARNING. To prevent accidental
starting that could cause serious
personal injury, always disconnect the
engine spark plug wire from the spark
plug when assembling parts.
ASSEMBLING THE U-HANDLE
Loosen the 4 bolts on the upper clamp using a hex
key, Fig.1.
Remove the top half of the mounting bracket and
install the two U-handles into the lower half of the
mounting bracket, Fig.2. Make sure the handle with
controls is positioned for use with your right hand.
Replace the top half of the mounting bracket and
lightly tighten the four bolts with the hex key, Fig.3.
Do not fully tighten the bolts until you have set the
perfect working position with the harness.
UNPACKING
If any parts are found to be missing, the machine
and its accessories should be returned together in
their original packaging to the retailer. Do not throw
the packaging away, keep it safe throughout the
guarantee period, then recycle if possible,
otherwise dispose of it by the proper means. Do
not let children play with empty plastic bags due to
the risk of suffocation.
ASSEMBLY
6
Fig. 1
Fig. 2
Fig. 3
Advertisement
Table of Contents
