Table of Contents
Advertisement
Operation with DVD and Video CD
Playing a DVD and Video CD
Playback Setup
DVD
Turn on the TV and select the video input source
connected to the DVD player.
Audio system: Turn on the audio system
and select the input source connected to the
DVD player.
1 1
Press OPEN/CLOSE to open the disc tray.
2 2
Load your chosen disc in the tray, with the play-
back side down.
When a double-sided DVD is inserted, make sure
the side you want to play is facing up.
3 3
Press OPEN/CLOSE to close the tray.
READING appears on the TV screen, and playback
N
starts automatically. If playback does not start,
press PLAY
.
In some cases, the disc menu might appear
instead.
4 4
To stop the playback, press STOP
Press OPEN/CLOSE to remove the disc and then
press OPEN/CLOSE again to close the tray press
to turn off the unit.
+ + + + / / / / 1
1
1
1
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which offer a menu.
DVD
b B v V
Use the
buttons to select the title/chapter you
want to view, then press ENTER/OK to start
playback.
Press TOP MENU or MENU to return to the menu
screen.
VCD2.0
Use the number buttons to select the track you want
to view.
Press RETURN to return to the menu screen.
Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on the each menu screen.
You also may set PBC to Off under setup. See page
19.
Notes
– If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
"Parental Control", on page 20).
– DVDs may have a region code.
Your player will not play discs that have a region code
different from your player. The region code for this
player is 2 (two).
VCD2.0
VCD1.1
x
.
1-27
General Features
Note
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.
Moving to another TITLE
When a disc has more than one title, you can move to
another title as follows:
Press DISPLAY, then press the appropriate
numbered button (0-9) to select a title number.
Moving to another CHAPTER/TRACK
VCD1.1
1/12
DVD
When a title on a disc has more than one chapter or a
.
>
disc has more than one track, you can move to another
chapter/track as follows:
Press SKIP
or
.
select the next chapter/track or to return to the
beginning of the current chapter/track.
Press SKIP
twice briefly to step back to the
previous chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY. Then, press
chapter/track icon. Then, enter the chapter/track
number using the numbered buttons (0-9).
Note
For two-digit numbers, press the numbered buttons
(0-9) in rapid succession.
Search
m
VCD2.0
DVD
1 Press REW
or FWD
m
The player will now go into SEARCH mode.
2 Press REW
or FWD
m
m
m
required speed:
M
M
M
X2,
X4,
X16,
X2,
X4,
X16,
m
m
m
With a Video CD, the Search speed changes:
M
X2,
X4,
X8 (backward) or
X8 (forward).
3 To return to playback, press PLAY
Still Picture and Frame-by-Frame Playback
VCD2.0
VCD1.1
DVD
X X X X / / / / C C C C
1 Press PAUSE/STEP
The player will now go into PAUSE mode.
2 You can advance the picture frame-by-frame by
pressing PAUSE/STEP
control.
1/3
DVD
1/3
briefly during playback to
3 3 3 3
4 4 4 4
/
to select
M
VCD1.1
M
during playback.
repeatedly to select the
m
M
X100 (backward) or
M
M
X100 (forward).
X2,
X4,
N
.
during playback.
X X X X / / / / C C C C
repeatedly on the remote
Advertisement
Table of Contents
