Table of Contents
Advertisement
Operation with DVD and Video CD
Playback Setup
1. Turn on the TV and select the video input source
connected to the DVD+VCR.
2. Turn on the audio system (if applicable) and select
the input source connected to the DVD+VCR.
3. Press OPEN/CLOSE (
load your chosen disc in the tray, with the playback
side down.
4. Press OPEN/CLOSE (
Playback starts automatically. If playback does not
start, press PLAY (N).
In some cases, the disc menu might appear instead.
5. To stop the playback, press STOP (x).
The unit records the stopped point, depending on
the disc. "Xx" appears on the screen briefly. Press
PLAY (N) to resume playback (from the scene
point). If you press STOP (x) again or unload the
disc ("x" appears on the screen.), the unit will clear
the stopped point.
Press OPEN/CLOSE (
Press OPEN/CLOSE (
POWER (I/1), the disc tray closes automatically
and unit turns off.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD or Video CD which offer a menu.
DVD
Use the b B v V buttons to select the title/chapter
you want to view, then press ENTER to start. Press
TOP MENU or MENU to return to the menu screen.
VCD
Use the number buttons to select the track you want
to view and press RETURN (O) to return to the
menu screen. Menu settings and operating proce-
dures may differ. Follow the instructions on each
menu screen. You also may set PBC to Off (See
"PBC" on page 19).
Notes:
•
If parental control is set and the disc is not within the rating
settings you must input the password.
(See "LOCK" on page 20).
•
DVDs may have a region code. Your player will not play
discs that have a region code different from your player.
The region code for this player is 1 (one)
) to open the disc tray and
) to close the tray.
) to remove the disc.
) to close disc tray or press
General Features
Notes:
Unless stated otherwise, all operations described use
the remote control. Some features may also be avail-
able on the Setup menu.
Moving to another TITLE
When a disc has more than one title, you can move to
another title. Press DISPLAY and select desired title by
using number (0-9) or b / B then press ENTER to move
to another title.
Moving to another CHAPTER / TRACK
DVD
VCD
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
•
Press SKIP (> or .) briefly during playback to
select the next chapter/track or to return to the
beginning of the current chapter/track.
•
Press SKIP (.) twice in quick successions to
step back to the previous chapter/track.
•
To go directly to any chapter during DVD playback,
press DISPLAY and press v / V to select the chap-
ter/track icon. Input the chapter/track number (0-9)
or use b / B, then press ENTER.
Note:
On a Video CD with PBC, you must set PBC to Off on the
setup menu to use this function (See "PBC" on page 19).
Slow Motion
DVD
VCD
1. Press SLOW (y) during playback or still mode.
The DVD+VCR will now go into SLOW mode.
2. Use SLOW (y) to select the required speed:
T 1/7, T 1/6, T 1/4, or T 1/2 (forward).
3. To exit Slow Motion mode, press PLAY (N).
Note:
Slow motion playback in reverse is not possible.
DVD
29
Hide quick links:
Advertisement
Table of Contents
