Yamaha Viking YXM70VPXH 2016 Owner's Manual page 42

The hour meter shows the total time the en-
gine has been running.
The voltage display shows the battery volt-
age.
Pushing the "CLOCK" button switches the
display between the clock mode "CLOCK",
the hour meter mode "HOUR", and the volt-
4
age display mode "
der:
CLOCK → HOUR →
To set the clock
1. Set the display to the clock mode.
2. Push the "SELECT" button and "RESET"
button together for at least three sec-
onds.
3. When the hour digits start flashing, push
the "RESET" button to set the hours.
4. Push the "SELECT" button, and the mi-
nute digits will start flashing.
5. Push the "RESET" button to set the minu-
tes.
" in the following or-
→ CLOCK
6. Push the "SELECT" button, and then re-
lease it to start the clock.
Voltage display mode
This display shows the battery voltage.
" " appears for 1 second when the volt-
age display mode is first selected, and
then " " appears and the battery voltage is
displayed.
If the battery voltage is less than 10 volts,
"LO" is displayed, and if the voltage is above
16 volts, "HI" is displayed.
4-8