Yamaha Viking YXM70VPXH 2016 Owner's Manual page 41

The odometer shows the total distance trav-
eled by the vehicle.
The tripmeters show the distance traveled
since they were last reset.
TIP
 The odometer will lock at 99999.
 The tripmeters will reset and continue
counting after 9999.9 is reached.
Pushing the "SELECT" button switches the
display between the odometer mode "ODO"
and the tripmeter modes "TRIP A" and "TRIP
B" in the following order:
ODO → TRIP A → TRIP B → ODO
To reset a tripmeter, select it by pushing the
"SELECT" button, and then push the "RE-
SET" button for at least three seconds. The
tripmeters can be used to estimate the dis-
tance that can be traveled with a full tank of
fuel. This information enables you to plan fu-
ture fuel stops.
TIP
To switch the display between "mph" and
"km/h", turn the key to "
and hold the "SELECT" button while turning
the key to " " (on).
Clock, hour meter and voltage display
modes
1
2
3
1. "SELECT" button
2. "RESET" button
3. "CLOCK" button
4. Clock/Hour meter/Voltage display
The clock displays time in 12-hour format.
4-7
" (off), then push
4
4