GE PT9050 Owner's Manual page 23

Troubleshooting tips ...
Problem Possible Cause
Oven light does not Light bulb is loose or defective.
work
Pad operating light is broken.
Oven will not self- The temperature is too high to set a self-
clean clean operation.
Oven controls improperly set.
Excessive smoking Excessive soil or grease.
during clean cycle
Excessive smoking Food too close to burner element.
during broiling
Oven door will not Oven too hot.
open after a clean
cycle
Oven not clean after Oven controls improperly set.
a clean cycle
Oven was heavily soiled.
The self-clean cycle has been selected
"DOOR " flashes
but the door is not closed.
in the display
"DOOR " will flash while the oven door
is locking to start self-clean and steam
clean.
The oven door is locked because the
"DOOR " light is
temperature inside the oven has not
on when you want
dropped below the locking temperature.
to cook
"F— and a number You have a function error code.
or letter" flash in
the display
If the function code repeats.
Display goes blank A fuse in your home may be blown or the
circuit breaker tripped.
The clock is turned off.
Oven is in Sabbath Mode.
Power outage, Power outage or surge
clock flashes
"Burning" or "oily" This is normal in a new oven and will
odor emitting from disappear in time.
the vent
Strong odor An odor from the insulation around the
inside of the oven is normal for the first
few times the oven is used.
Fan noise A cooling fan may automatically turn on.
My oven door glass No. The inner oven glass is coated with
appears to be a heat barrier to reflect the heat back
"tinted" or have a into the oven to prevent heat loss and
"rainbow" color. Is keep the outer door cool while baking.
this defective?
49-80754-2
What To Do
Tighten or replace bulb.
Call for service.
Allow the oven to cool and reset the controls.
See the Cleaning the Oven section.
Press the Cancel/Off pad. Open the windows to rid the
Allow the oven to cool below locking temperature.
See the Cleaning the Oven section.
Clean up heavy spillovers before starting the clean
cycle. Heavily soiled ovens may need to self-clean
again or for a longer period of time.
locking.
This is normal.
Press the Cancel/Off pad. Allow the oven to cool.
Press the Cancel/Off pad. Allow the oven to cool for one
hour. Put the oven back into operation.
repeats, call for service.
Replace the fuse or reset the circuit breaker.
See the Special Features section.
See the Special Features section.
it by pressing the Cancel/Off pad, setting the clock and
resetting any cooking function.
To speed the process, set a self-clean cycle for a
minimum of 3 hours. See the Cleaning the Oven
section.
This is temporary and will go away after several uses or
a self-clean cycle.
This is normal. The cooling fan will turn on to cool
oven is turned off.
see this tint or rainbow color.
LOCKED light goes off.
23