Clifford Responder LC3 4706X Owner's Manual page 42

Hide thumbs Also See for Responder LC3 4706X:

Table of Contents

Button Auto Lock

When On, the remote control buttons lock if more than 20 seconds

lapses between button presses. If a button is pressed when locked, a

fault tone is emitted. To unlock the buttons; press the

by the

button, the buttons unlock and tones play to conﬁrm.

Car Select

Car 2 must ﬁrst be turned On (See Remote Features menu under Pro-

gramming). Press and hold the

ﬂashes the LED and beeps once or twice to indicate the selected Car

is 1 or 2, release the button for Car Select or continue to hold for

programming.

Release the

beeps continue to perform Car Select. Once the car is selected a com-

mand can be performed by pressing one of the command buttons.

Programming

To enter: Press and hold the

one long beep and turns the LED on, the programming main menu has

been accessed (see the following "Remote Features menu").

To exit: Press and release the

button again. 1 short and 1 long beep is emitted for each step

back, the LED turns off when programming is exited.

Remote Features menu

After entering the programming mode: Press and hold the

button, 2 LED ﬂashes and beeps indicate the remote features

menu is accessed and can be set. Press buttons indicated below,

1beep and ﬂash turns the feature on, 2 beeps and ﬂashes turns

the feature off.

•

Autolock feature: Press

All manuals and user guides at all-guides.com

button for 3 seconds. The remote

button, then press and release while the LED and

button for 8 seconds, the remote emits

button once, then press and hold the

to turn on/off.

button followed

Table of Contents