Table of Contents
Advertisement
9
DELAY START button
10
Indicator pilot lights
Symbols :
Display
Duration of selected programme (7.1) :
Duration of selected programme: After selecting a programme, the duration is displayed
in hours and minutes (for example 2.05 ). The duration is calculated automatically on the
basis of the maximum recommended load for each type of fabric. After the programme has
started, the time remaining is updated every minute.
Alarm codes
In the event of operating problems, some alarm codes can be displayed, for example
(see chapter «What to do if...»).
End of programme
When the programme has finished a blinking zero
( 10.2 ), the WASHING pilot light ( 10.1 ) and the pilot light of button 8 go out and the
door can be opened.
Incorrect option selection
If an option which is not compatible with the set wash programme is selected, the message
Err is displayed for about 2 seconds and the yellow pilot light of button 8 light starts
blinking.
Delay Start (7.2)
The selected delay (20 hours max) set by means of the relevant button appears on the
display for about 3 seconds, then the duration of the previously selected programme is
displayed. The symbol 7.2 will appear on the display. The delay time value decreases by one
unit every hour. When only 1 hour remains, the time decreases every minute.
Child safety lock (7.3)
If your laundry is not removed during 10 minutes after the programme is finished, the
backlight of the display switches off and the energy saving system will be enabled.
Only the button 8 pilot light is blinking to indicate that the appliance has to be switched
off.
By pressing any buttons the appliance will come out from the energy saving status and
you could set another washing programme or switch off the appliance.
Handwash,
Cold,
Rinse Hold,
Child Lock
is displayed, the DOOR pilot light
Display
7
Advertisement
Table of Contents
