Select An Additional Rinse (Extra Rinse); Altering An Option Or A Running Programme; Interrupting A Programme; Cancelling A Programme - AEG LAVAMAT LS 60840 L User Manual

12 Daily use
You must select this option after you have set the programme and before you press the
button 8 .
The wash programme can be delayed from 30 min - 60 min - 90 min, 2 hours and then by
1 hour up to a maximum of 20 hours by means of this button.
If you wish to add laundry in the machine during the delay time you will press button 8 to
put the machine in pause. Add the laundry, close the door and press button 8 again.
Selecting the delayed start.
• Select the programme and the required options.
• Select the delay start.
• Press button 8 : the appliance starts its hourly countdown. The programme will start
after the selected delay has expired.
Cancelling the delayed start
• Set the washing machine to PAUSE by pressing the button 8 ;
• Press button 9 once until the symbol
• Press the button 8 again to start the programme.
• The selected delay can be changed only after selecting the washing programme again.
• The door will be locked throughout the delay time. If you need to open the door, you
must first set the washing machine to PAUSE by pressing the button 8 . After you have
closed the door, press the button 8 again.
The button 9 can not be selected with DRAIN programme.

Select an additional rinse (EXTRA RINSE)

This appliance is designed for saving water. However, for people with a very delicate skin
(allergic to detergents) it may be necessary to rinse the laundry using an extra quantity of
water.
Press simultaneously buttons 2 and 3 for some seconds: the pilot light 10.3 comes on. This
function stays permanently on. To remove it press the same buttons again until the pilot
light 10.3 goes off.

Altering an option or a running programme

It is possible to change any option before the programme carries it out. Before you make
any change, you must pause the washing machine by pressing the button 8 .
Changing a running programme is possible only by resetting it . Turn the programme
selector dial to
pressing the 8 button again. The washing water in the tub will not emptied out.

Interrupting a programme

Press the button 8 to interrupt a programme which is running, the corresponding light
starts blinking. Press the button again to restart the programme.

Cancelling a programme

Turn the selector dial to
a new programme.
and then to the new programme position. Start the new programme by
to cancel a programme which is running. Now you can select
' is displayed;