Table of Contents
Advertisement
4. Repeat step 1 to check if the IP address has changed.
Store the current switch configuration
5. At the "#" prompt, enter the following command and press <Enter>.
# copy running-config startup-config
Figure 6-3: Saving Current Configuration Command Screen
If the IP is successfully configured, the Industrial Managed Switch will apply the
new IP address setting immediately. You can access the Web interface of the
Industrial Managed Switch through the new IP address.
If you are not familiar with the console command or the related
parameter, enter "help" anytime in console to get the help
description.
Note
10
Advertisement
Table of Contents
