Sony SHOWVIEW SLV-D950B Operating Instructions Manual page 84

Notes
• Surround effects cannot be obtained for DTS or linear PCM.
• When the playing signal does not contain a signal for the rear speakers, the surround effects
will be difficult to hear.
• When you activate the surround effect, turn off the surround setting of the connected TV or
amplifier (receiver).
• Make sure that your listening position is between and at an equal distance from your
speakers, and that the speakers are located in similar surroundings.
• If you use the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack and set "Dolby
Digital" to "Dolby Digital" or "DTS" to "Oui" in "OPTIONS AUDIO" menu, sound will
come from your speakers but it will not have the surround effect.
• Certain audio features of this product manufactured under a license from Desper Products,
Inc. Spatializer
Products, Inc.
84
Virtual surround setting
®
, VBX™ and the circle-in-square device are trademarks owned by Desper