Sony SHOWVIEW SLV-D950B Operating Instructions Manual page 45

2 Press V/v to select "ShowView", then press
ENTER.
ENTER
The "ShowView" menu appears.
3
Press the number buttons to enter the
1 2 3
ShowView number.
4 5 6
If you make a mistake, press CLEAR and re-
7 8 9
enter the correct number.
0
You can also press B to delete the last entered
number.
CLEAR
ENTER
4
Press ENTER.
The date, start and stop times, programme
ENTER
position, tape speed and VPS (Video
Programme System)/PDC (Programme
Delivery Control) setting appear on the TV
INPUT
screen.
SELECT
• If "– –" appears in the "PR" (programme)
CLEAR
• To record from a decoder or other source connected to one or more of the
You will only have to do this operation once for the referred channel. The
VCR will then store your setting.
If the information is incorrect, press CLEAR to cancel the setting.
column (this may happen for local broadcasts), you have to set the
appropriate programme position manually.
Press V/v to select the desired programme position.
LINE inputs, press INPUT SELECT to display the connected line in the
"PR" position.
Recording TV programmes using the ShowView
ShowView
Code – – – – – – – – –
Code : 0–9
Corriger : B
RETURN SET UP
ShowView
Code 1 2 3 4 – – – – –
Code : 0–9
Corriger : B
ENTER RETURN SET UP
PR JOUR DEBT FIN SPEED V/P
35 SA 19 19 : 00 20 : 00 SP Non
– – – – – – – – : – – – – : – – – –
– – – – – – – – : – – – – : – – – –
– – – – – – – – : – – – – : – – – –
– – – – – – – – : – – – – : – – – –
– – – – – – – – : – – – – : – – – –
V v B b RETURN CLEAR
ENTER
continued
® system (SLV-D950B only)
– –
– –
– –
– –
– –
45