Sony SHOWVIEW SLV-D950B Operating Instructions Manual page 50

5
ENTER
6
To stop recording
To stop the DVD-VCR while recording, press SELECT VIDEO and then press x.
Daily/weekly recording
In step 3 above, press v to select the recording pattern. Each time you press v, the
indication changes as shown below. Press V to change the indication in reverse order.
today t JOUR (Monday to Sunday) t S-SA (every Saturday) ..... t
S-DI (every Sunday) t 1 month later t (dates count down) t today
To use the Auto Tape Speed function
In step 3 above, press v to select "Auto". When you are recording a programme in
the SP mode and the remaining tape length becomes shorter than the recording time,
the recording tape speed is automatically changed to the LP mode. Note that some
noise will appear on the picture when the tape speed is changed. To operate this
function correctly, the "Sélect. Cassette" setting in the "REGLAGE DE LA
FONCTION VIDEO" menu must be accurate (see page 105).
Tips
• To set the line input video source, you can also use the INPUT SELECT button.
• To check, change, or cancel the programme setting, see "Checking/changing/cancelling timer
settings" on page 56.
Notes
• When setting the timer with VPS/PDC signals, enter the start times exactly as indicated in the
TV programme guide. Otherwise, the VPS/PDC function will not work.
• If the VPS/PDC signal is too weak or the broadcasting station failed to transmit VPS/PDC
signals, the VCR will start recording at the set time without using the VPS/PDC function.
• The
50
Recording TV programmes using the timer
Press ENTER to confirm all settings.
Press ?/1 to turn off the DVD-VCR.
The indicator appears in the display window and the VCR stands by for
recording.
To record from a decoder or other source, leave the connected equipment
switched on.
indicator flashes in the display window when you press ?/1 with no tape inserted.