Advertisement
Assembly
WARNING
Do not plug in your steam mop until you are familiar with all instructions and operating procedures.
1
3
Attach the tool box to the handheld pod by
aligning the clip on the back of the box with
the opening on the bottom of the pod. Slide
the pod into place.
NOTE: For instructions on attaching the wall mount and Storage, please refer to page 12.
WARNING
Never put descaling aromatic, alcoholic or detergent products into the steam cleaner, as this may
damage it or make it unsafe for use. Tinted plates on foot may get hot while steam mop is in use. Do not
touch while hot. Upright storage of the steam mop with a wet mop pad may result in the formation of
white marks on your floor. To remove the white marks, clean area with vinegar.
Attach the extension
wand to the mop pad
foot by snapping it
into place.
click
2
click
4
Wrap the cable around the palm of
your hand into a circle. Then, place
the wrap strap around the cable
and back onto itself to secure.
Then, insert the
handheld pod to the
extension wand until
it clicks into place.
BISSELL.com 5
Advertisement
