Toshiba SD-770SR Owner's Manual page 60

Function setup
Customizing the Function Settings (continued)
Setting details
HD Resolution
1) Press SETUP button.
2) Press / button to select the Video.
3) Press button, then the
the HD Resolution.
4) Press ENTER button, then the
shift and change the HD resolution.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Note
• Supported HD JPEG Mode:
480p/576p, 720p, 1080i.
• If the Video Output is not set to "HDMI", you cannot
select the "HD Resolution".
60
/ button to select
/ button to
HD Jpeg Mode
1) Press SETUP button.
2) Press / button to select the Video.
3) Press button, then the
the HD Jpeg Mode.
4) Press ENTER button, then the
select the output mode.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
On: JPEG image is displayed in a suitable picture
quality (480p/576p, 720p or 1080i)
Off: The picture quality is fixed to 480p/576p.
Note
If the Video Output is not set to "HDMI", you cannot
select the "HD Jpeg Mode".
JPEG Interval
1) Press SETUP button.
2) Press / button to select the Video.
3) Press button, then the
the JPEG Interval.
4) Press ENTER button, then the
shift and change the JPEG Interval.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Off: Plays back one file at a time.
5 seconds: Plays back images in the form of a slide
show at 5 seconds interval.
10 seconds: Plays back images in the form of a slide
show at 10 seconds interval.
15 seconds: Plays back images in the form of a slide
show at 15 seconds interval.
/ button to select
/ button to
.
20
/ button to select
/ button to