Table of Contents
Advertisement
TV System
1) Press SETUP button.
2) Press
/
button to select the Video.
3) Press
button, then the
the TV System.
4) Press ENTER button, then the
shift and change the system.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
NTSC:
Select if your TV system is NTSC.
PAL:
Select if your TV system is PAL.
Auto:
The DVD video player automatically
identifies PAL or NTSC video system of a
disc. Connect a multisystem TV (PAL /
NTSC compatible) to view a picture.
A playback picture may be distorted when
detected a signal change between PAL
and NTSC on the disc. For the case of
Progressive mode, your multisystem TV
must be able to support 525p and 625p.
/
button to select
/
button to
Video Output
1) Press SETUP button.
2) Press
/
button to select the Video.
3) Press
button, then the
the Video Output.
4) Press ENTER button, then the
shift and change the Output mode.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Composite: Select if you connect the DVD to your
TV via composite video (yellow) input.
Component:Select if you connect the DVD to your
TV which has component video inputs.
RGB:
Select if you connect the DVD to your
TV which has RGB inputs by scart
cable.
P-Scan:
Select if you connect the DVD to your
(Progressive)
TV which has component video inputs
that support progressive scan.
HDMI:
High Definition Multimedia Interface.
Select if you connect the DVD to TV via
HDMI input.
/
button to select
/
button to
59
Advertisement
Table of Contents
